Campbellsville Steeple Series S

MODEL:	HEIGHT:	WIDTH	ESTIMATED WEIGHT
S-100	12'-0"	1'-4"	97
	16'-0"	2'-0"	136
	20'-0"	2'-4"	205
S-105	12'-0"	1'-4"	97
	16'-0"	2'-0"	136
	20'-0"	2'-4"	205
S-110	12'-0"	1'-8"	116
	16'-0"	2'-4"	151
	20'-0"	3'-0"	238
S-110-0	12'-0"	1'-8"	116
	16'-0"	2'-4"	151
	20'-0"	3'-0"	322
S-111	25'-0"	4'-0"	281
	30'-0"	5'-0"	455
S-112	12'-0"	1'-8"	138
	16'-0"	2'-3"	178
	20'-0"	3'-0"	322
S-112-0	12'-0"	1'-8"	186
	16'-0"	2'-3"	249
	20'-0"	3'-0"	322
S-130	20'-0"	3'-6"	296
	24'-0"	3'-6"	336
S-130-0	20'-0"	3'-6"	370
	24'-0"	3'-6"	424
S-140	22'-0"	4'-6"	359
	25'-0"	4'-6"	380
S-150	20'-0"	4'-6"	369
	25'-0"	4'-6"	418
S-150-O	20'-0"	4'-6"	429
	25'-0"	4'-6"	477

Campbellsville steeples are furnished with lightning protection cable to base. A weathervane, finial, or cross is optional. All steeples
are adaptable to pitched or flat roofs. Structural framework utilizes structural alloy 6061-T6 aluminum angle extrusions, covered with
.032" aluminum in your choice of any of our stock baked-on Kynar finishes. Other finishes such as copper, lead coated copper,
Altrista zinc, and non-stock Kynar finishes are available at additional cost. If you do not see a steeple that meets your needs Camp-
bellsville can also provide custom fabrication to your design criteria. Simply fax or e-mail us a drawing of your design and we will
provide a prompt quotation. You may also want to consider our Free Design Service to help you in designing a steeple that is just
right for your architectural style and jobsite requirements. If an engineer's stamp is required on the final steeple shop drawings and
anchor details, this can be provided at additional cost. We must be notified that the steeple is to be engineered before the preparation
of the shop drawings.

BACK

Hit Counter